Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGenie Cable & Drum Replacement: The Boulder City Owner’s Guide
We replace Genie-compatible cables and drums in Boulder City for $130 – $250 installed, parts and labor included, and we can usually get to a failed cable the same day you call. The cable-and-drum set is the pair of steel cables and the grooved spool at each end of the torsion shaft that winds the cable up and lets it back down as your door travels. When one goes, you’ll know: a loud snap from the garage, a door that hangs crooked, or a cable dangling loose along the track.
Most Boulder City owners find out the same way. The door comes down hard and won’t lift, or they back out in the morning and see the cable coiled on the floor. We’ve run enough of these calls to tell you that a Genie door in southern Nevada often shows cable wear earlier than the national average, and we’ll get to why further down.
Which Genie Models This Applies To
Genie’s cable and drum assemblies show up across the lineup, but the part you need depends on the door, not just the opener model printed on the motor housing. The opener is the motor unit; the cable and drums are part of the door’s torsion system above the opening. Owners often call us with the opener model number in hand when what we actually need is the door’s height, weight, and the diameter of the torsion shaft.
Here’s the compatibility detail that trips people up: Genie drums come in different cable-groove diameters and cable-gauge pairings, and matching the wrong drum to your door’s weight will let the cable stack unevenly and fail inside a season. That’s why we measure rather than guess. The cleanest way to identify your part is the label on the drum itself, or a tape measure across the torsion shaft and across the cable. If the label is worn off, that’s fine. We’ll match it on site.
On OEM versus aftermarket: genuine Genie parts fit cleanly but cost more and take longer to source. A quality aftermarket cable and drum set, correctly matched to your door’s weight and shaft size, performs the same job for a lower price, and it’s what we install most often. We’ll tell you which is which before you choose, and you’ll see the difference in the written price.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Genie Cable & Drum Replacement Is Failing
A cable and drum set usually gives warning before it lets go. Five things to watch for:
- A snapped cable hanging loose. The cable has parted, likely at the drum or the bottom bracket. The door is now held by one side only, which is dangerous, so stop using the opener and keep people clear until we’ve been out.
- The door hangs crooked or binds on one side. One cable has stretched or slipped its drum groove while the other still holds tension. That uneven pull strains the panels and track.
- Frayed strands or a fuzzy look along the cable. Individual wires inside the cable are breaking one at a time before the whole cable goes. Southern Nevada’s dry air and temperature swings age the cable faster than a mild climate would.
- A cable jumped off the drum and wound up on the shaft. The drum’s groove has worn or the cable spooled wrong. This one needs the drum checked, not just the cable.
- Metal shavings or rust dust under the drums. The drum is grinding against the cable, wearing both down. Catch that early and you may only be replacing one side.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cable repair in Boulder City runs $130 – $250 installed. That covers the Genie-compatible cable and drum set matched to your door, labor, and a written guarantee. The number lands at the low end for a single cable and drum on a lighter door and toward the top for a heavier double door, a matched pair of drums, or a job that also needs a bottom bracket or roller work.
Here’s the pricing breakdown most people want up front:
- Cable repair (one side or the set): $130 – $250
- Spring repair, if the spring failed along with the cable: $180 – $340
- Garage door repair, broader fixes caught on the same visit: $150 – $600
Parts and labor are quoted together so you’re not left guessing which line is which. We give you the written price before any work starts, and the number on the invoice matches the number you heard. Every repair is backed by the 365-Day Done Right Promise: if the repair fails within a year, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can safely check. Some you can’t.
Safe to do yourself: look at the door from a distance to see if it hangs level, shine a light along the cables and note any fraying or a hanging strand, and look for rust dust under the drums. Take a photo of the drum label if you can see it. All of that helps us price the job before we arrive.
Not safe to do yourself: the torsion system. The torsion spring holds hundreds of pounds of stored tension, and the cables are what transfer that tension. Loosening a drum or cutting a cable on a wound system can release that energy suddenly. We’ve seen what happens when a homeowner tries it, and it isn’t worth the risk. This is the one honest caution we’d give anyone: leave the torsion work to a trained technician. If your cable has snapped, stop using the door and call us.
For a failed cable in Boulder City, call (844) 560-4479. A live person answers, day or night, and we’ll get you a written price before anything is touched.
FAQs
Plan on roughly 8 to 12 years for a cable and drum set under normal use, though in Boulder City’s dry desert air and seasonal heat swings, cable wear can show up sooner, especially without regular lubrication. Cables age from the inside out, so a set that looks clean on the outside can still be near the end.
Rarely. Once a cable frays or a drum’s groove wears, replacement is the reliable fix, not repair. The only exception is a cable that’s slipped its groove on an otherwise healthy drum, which we can sometimes re-seat and re-tension. We’ll tell you which situation you’re in before any work begins.
Most cable and drum replacements take about one to two hours once we’ve measured and matched the part. A heavier double door or a job that also needs spring or bracket work can run longer. We’ll give you a realistic arrival window and work inside it.
We match the cable and drum to your door’s weight, height, and shaft diameter by measuring on site, then source a Genie-compatible set from our supply network. We don’t keep parts in a warehouse or carry them on a truck, so the match is made to your door, not pulled off a shelf and hoped to fit. Once matched, we install it, test the door through a full cycle, and hand you a written guarantee.
We handle Genie, LiftMaster, and Chamberlain doors, and we’re an independent service provider, not affiliated with Genie. If you’re not sure whether it’s a cable, a drum, or the spring, describe what’s happening and we’ll point you the right way.
Call (844) 560-4479 for a free estimate on your Genie cable and drum replacement in Boulder City. We’ll give you the price up front, arrive in the window we promise, and back the work in writing. Our technicians have up to 25 years of experience, they’re background-checked and arrive in uniform, and we leave the job site cleaner than we found it.
Written by the team at Bramwell Garage Door Repair Boulder City, serving Boulder City and nearby areas.