A Bramwell company - serving Boulder City, NV

Genie Cable & Drum Replacement in Boulder City, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Genie Cable & Drum Replacement: The Boulder City Owner’s Guide

We replace Genie-compatible cables and drums in Boulder City for $130 – $250 installed, parts and labor included, and we can usually get to a failed cable the same day you call. The cable-and-drum set is the pair of steel cables and the grooved spool at each end of the torsion shaft that winds the cable up and lets it back down as your door travels. When one goes, you’ll know: a loud snap from the garage, a door that hangs crooked, or a cable dangling loose along the track.

Call (844) 560-4479

Most Boulder City owners find out the same way. The door comes down hard and won’t lift, or they back out in the morning and see the cable coiled on the floor. We’ve run enough of these calls to tell you that a Genie door in southern Nevada often shows cable wear earlier than the national average, and we’ll get to why further down.

Which Genie Models This Applies To

Genie’s cable and drum assemblies show up across the lineup, but the part you need depends on the door, not just the opener model printed on the motor housing. The opener is the motor unit; the cable and drums are part of the door’s torsion system above the opening. Owners often call us with the opener model number in hand when what we actually need is the door’s height, weight, and the diameter of the torsion shaft.

Here’s the compatibility detail that trips people up: Genie drums come in different cable-groove diameters and cable-gauge pairings, and matching the wrong drum to your door’s weight will let the cable stack unevenly and fail inside a season. That’s why we measure rather than guess. The cleanest way to identify your part is the label on the drum itself, or a tape measure across the torsion shaft and across the cable. If the label is worn off, that’s fine. We’ll match it on site.

On OEM versus aftermarket: genuine Genie parts fit cleanly but cost more and take longer to source. A quality aftermarket cable and drum set, correctly matched to your door’s weight and shaft size, performs the same job for a lower price, and it’s what we install most often. We’ll tell you which is which before you choose, and you’ll see the difference in the written price.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Genie Cable & Drum Replacement Is Failing

A cable and drum set usually gives warning before it lets go. Five things to watch for:

  • A snapped cable hanging loose. The cable has parted, likely at the drum or the bottom bracket. The door is now held by one side only, which is dangerous, so stop using the opener and keep people clear until we’ve been out.
  • The door hangs crooked or binds on one side. One cable has stretched or slipped its drum groove while the other still holds tension. That uneven pull strains the panels and track.
  • Frayed strands or a fuzzy look along the cable. Individual wires inside the cable are breaking one at a time before the whole cable goes. Southern Nevada’s dry air and temperature swings age the cable faster than a mild climate would.
  • A cable jumped off the drum and wound up on the shaft. The drum’s groove has worn or the cable spooled wrong. This one needs the drum checked, not just the cable.
  • Metal shavings or rust dust under the drums. The drum is grinding against the cable, wearing both down. Catch that early and you may only be replacing one side.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Cable repair in Boulder City runs $130 – $250 installed. That covers the Genie-compatible cable and drum set matched to your door, labor, and a written guarantee. The number lands at the low end for a single cable and drum on a lighter door and toward the top for a heavier double door, a matched pair of drums, or a job that also needs a bottom bracket or roller work.

Here’s the pricing breakdown most people want up front:

  • Cable repair (one side or the set): $130 – $250
  • Spring repair, if the spring failed along with the cable: $180 – $340
  • Garage door repair, broader fixes caught on the same visit: $150 – $600

Parts and labor are quoted together so you’re not left guessing which line is which. We give you the written price before any work starts, and the number on the invoice matches the number you heard. Every repair is backed by the 365-Day Done Right Promise: if the repair fails within a year, we come back and fix it at no charge.

DIY or Call Us?

Some of this you can safely check. Some you can’t.

Safe to do yourself: look at the door from a distance to see if it hangs level, shine a light along the cables and note any fraying or a hanging strand, and look for rust dust under the drums. Take a photo of the drum label if you can see it. All of that helps us price the job before we arrive.

Not safe to do yourself: the torsion system. The torsion spring holds hundreds of pounds of stored tension, and the cables are what transfer that tension. Loosening a drum or cutting a cable on a wound system can release that energy suddenly. We’ve seen what happens when a homeowner tries it, and it isn’t worth the risk. This is the one honest caution we’d give anyone: leave the torsion work to a trained technician. If your cable has snapped, stop using the door and call us.

For a failed cable in Boulder City, call (844) 560-4479. A live person answers, day or night, and we’ll get you a written price before anything is touched.

FAQs

Need Garage Door help nationwide? Licensed & insured · same-day response · free estimates
Call (844) 560-4479
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bramwell Garage Door Repair Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch